1. Nozzle Cap
2. Retaining Nut
3. Nozzle Body
4. Filter
5. Elbow

To change the spraying pattern, first make sure the retaining nut (2) is screwed tight to the elbow (5). If it is not tight, the nozzle cap
(1) and nozzle body (3) will rotate inside the retaining nut and the nozzle will not adjust.

For a straight stream pattern, rotate the nozzle cap outward. For a hollow cone pattern, rotate the nozzle cap inward towards the retaining nut.

If it becomes difficult to rotate the nozzle cap, remove the nozzle cap from the nozzle body and lubricate the O-ring on the nozzle body with a non-water soluble grease*